If your Samsung washer won’t stop filling with water, stop the cycle and close the household water supply if the water level continues to rise. A Samsung washing machine that keeps filling can have an external water-supply problem, an incorrect drain setup, a water-level sensing issue, or an internal inlet-valve fault. This guide covers Samsung washer won’t stop filling, Samsung washing machine won’t stop filling, and washer keeps filling with water symptoms.
What to Do First If the Washer Keeps Filling
If the water level is rising unusually high, pause or cancel the cycle. If water continues entering after the cycle is stopped, close the hot and cold supply valves from a dry location. Unplug the washer only if the plug and surrounding area are dry. Do not continue running the machine if there is a risk of overflow.
1. Check Whether Water Stops When the Washer Is Turned Off
This is an important clue. If water continues entering the drum even after the washer is turned off, close the household supply valves. A water inlet valve may not be closing correctly and professional service is appropriate.
If the water stops when the washer is turned off but continues too long during a cycle, the problem may involve cycle conditions, drain installation, water-level sensing, or control logic.
2. Check the Drain Hose Installation
An incorrectly installed drain hose can allow water to siphon out while the washer fills. The machine may then continue adding water because the expected water level is not reached.
Check the installation instructions for the exact Samsung model. Do not push the drain hose farther into the standpipe than specified and do not position it lower than the manufacturer recommends.
3. Check for Excessive Draining While Filling
If you can hear water entering the washer while water is also continuously flowing down the drain, siphoning may be occurring. Correcting the drain-hose installation may solve the apparent continuous-fill problem without replacing a washer part.
If your problem is the opposite and the washer receives no water, use the Samsung washer not filling with water guide.
4. Check the Water Supply and Pressure
Abnormal household water pressure can affect filling behavior. Make sure the supply valves are fully open and the hoses are not damaged or kinked.
Do not adjust a home pressure regulator blindly. If pressure appears abnormal at other fixtures as well, a plumber can test the household supply.
5. Water-Level or Pressure-Sensing Problem
The washer uses sensing systems to determine when the correct water level has been reached. If that information is incorrect, the machine may continue requesting water.
Diagnosis of internal pressure hoses, sensors, wiring, or control components requires cabinet access and should be handled by a qualified technician.
6. Water Inlet Valve May Be Stuck Open
An inlet valve controls water entering the washer. If water keeps flowing after the machine has been turned off, a valve that is mechanically stuck open is one possible cause.
Close the household supply valves and stop using the washer until it is inspected. Do not remove panels or test the valve with live electrical power.
7. Check for Error Codes or Unusual Cycle Behavior
Record any Samsung error code before resetting the washer. A water-supply code can help narrow the cause. If a 4C or related supply error appears, see the Samsung washer 4C error guide.
Samsung Top Load Washer Won’t Stop Filling
On a Samsung top-load washer, also make sure the drain hose is installed correctly and the lid closes normally. Do not bypass the lid lock or open internal panels to inspect water-level components.
Samsung Washer Filling With Water When Off
If a Samsung washer fills with water while switched off, close both household water valves. Water entering an inactive machine can indicate that an inlet valve is not sealing correctly. This is different from a washer that simply takes a long time to reach its normal fill level.
When to Call a Technician
Arrange professional service if water continues entering with the washer switched off, the machine risks overflowing, the water level becomes abnormally high, or the problem persists after checking the drain-hose installation and household supply.
Keep the washer off if water reaches electrical areas, a breaker trips, the power cord becomes hot, or there is a burning smell.
FAQ
Why won’t my Samsung washer stop filling with water?
Possible causes include drain siphoning, incorrect drain-hose installation, abnormal water pressure, a water-level sensing problem, or an inlet valve that is not closing correctly.
Why does my Samsung washer keep filling even when it is off?
If water enters while the washer is switched off, close the household supply valves. An inlet valve that is not sealing properly is one possible cause and the washer should be professionally inspected.
Can a drain hose make a Samsung washer keep filling?
Yes. If water siphons out through an incorrectly installed drain hose, the washer may continue adding water because the expected level is never reached.
Should I keep running the washer if the water level keeps rising?
No. Stop the cycle and close the supply valves if necessary. Continuing to operate the washer could cause an overflow.
Is this the same problem as a Samsung washer not filling with water?
No. A washer that will not fill has the opposite symptom. See the Samsung washer not filling with water guide for that problem.