Maytag washers may stop the spin cycle when they cannot drain, detect an unlocked lid, or sense an unstable load.
Safety first: Unplug the appliance before touching accessible hoses, filters, or panels. Do not bypass a door or lid switch, probe live wiring, or continue using an appliance with smoke, a burning smell, sparking, a hot plug, repeated breaker trips, or water near electrical parts.
Most Likely Causes
1. A kinked drain hose
Check the display and visible connections first.
2. A restricted pump
Do not force moving parts or bypass safety switches.
3. A lid-lock failure
Repeated symptoms require proper diagnosis.
4. An off-balance load
Check the display and visible connections first.
5. Worn suspension
Do not force moving parts or bypass safety switches.
6. A wiring or control fault
Repeated symptoms require proper diagnosis.
Step-by-Step Diagnosis
Step 1: Pause or cancel safely
Follow the instructions for the exact model.
Step 2: Inspect accessible hoses or door area
Disconnect power before handling accessible parts.
Step 3: Check external installation
Stop if water or electrical hazards are present.
Step 4: Correct a simple load or setting
Follow the instructions for the exact model.
Step 5: Restore power briefly
Disconnect power before handling accessible parts.
Step 6: Retry one normal cycle
Stop if water or electrical hazards are present.
Components Related to This Symptom
A qualified technician may inspect the drain pump, tub-to-pump hose, lid lock, suspension rods or shocks, drive system, pressure sensing, and control. The symptom alone does not confirm a failed part.
When to Call a Professional
Book service if the safe checks do not solve the problem, a code or symptom returns, or the repair requires meter testing, internal wiring access, appliance removal, or disassembly. Stop immediately for burning odor, sparks, hot wiring, breaker trips, or water near electrical parts.
Related Troubleshooting Guides
Dishwasher not draining, Washer not spinning, and Refrigerator not cooling.
Frequently Asked Questions
Why does it fill but not spin?
It may still be holding water or lack a lid-lock confirmation.
Is reset enough?
It can clear a temporary interruption, not a repeated fault.
Bottom Line
Start with the safe external checks, follow the guide for your exact model, and avoid guessing at internal components.